Archives December 2009

You may remember my rocking consolidated blog posts for Symmetrix FAST and Celerra FAST – But here is something I didn’t even have to create myself! This is a pure total rocking consolidation for Avamar! Wowza is the first thing I’d say, and for what it’s worth, I’ve seen the internal version of the same site – Believe me when I say, the customer facing version you see below here is WAAAAAAAAAYYYYYY better!  Seriously ! Check it out, and if you don’t think this is totally rocking, I’ll one-up it and do it even better! ;)

The link may require credentials on EMC’s PowerLink – so please keep that in mind when it comes to accessing the site!

So, check it out! This will be your best friend when it comes to working with Avamar, and solving your backup problems and other for the future! :)

Yea, I’ve been meaning to post this for many weeks, but better late than never for everyone who didn’t know about this!

I’m not sure whether this is good until Jan 22nd, or Jan 31st, it’s kind of contradicting itself… so good luck either way!

VMware “Upgrade” Promotion

PLEASE NOTE: In order to comply with VMware’s retake policy your initial VCP4 exam must be taken by January 22, 2010!

Notice: Due to overwhelming demand, existing VCP3 professionals will be able to obtain the VCP4 certification with no additional course requirement through January 31, 2010.

Dear VMware Certified Professionals,
First, let us say thank you for supporting VMware’s certification program! We appreciate our VCPs who have worked hard over the past few months to achieve our newest certification, the VCP on vSphere 4. In order to meet the December 31, 2009, deadline, many of you recently scheduled (and hopefully passed!) your exam with our testing partner. In fact, so many of you scheduled exams that some of our VCP professionals were unable to find a testing center with available seats prior to the December deadline.
In order to accommodate participants that, despite best efforts, were unable to schedule their exam prior to the deadline, VMware will continue accepting the VCP3 certification as a qualification to take the VCP4 exam without requiring attending the “What’s New” class through January 31, 2010. We fully expect that the additional four weeks will allow remaining participants ample time to find a testing center with available seating, and will NOT be extending the deadline any further, so please take advantage of this opportunity!
Regards,
The VMware Technical Certification Team

If you received an email from VMware regarding this promotion, below is how to redeem your VMware “Upgrade” exam (note: this is a two-part process):

Part I: Register for a VCP4 exam at full price using the Upgrade voucher number sent to you by email from VMware. Important: The unique voucher number needs to be entered during the registration process to establish your eligibility for a free retake exam if you fail the initial exam. This discount offer will not be available on VMware Certified Professional on vSphere™ 4 (VCP4) exams scheduled without an Upgrade voucher number.

Follow the steps below to enter the voucher number during the exam registration process:

1. Schedule an appointment for your VMware Certified Professional on vSphere™ 4 (VCP4) exam.
2. Once at the payment screen, scroll to the bottom of the page to access the “Voucher Number” field.
3. Enter your unique voucher number and click “Apply Voucher.” Note: The Total Due amount will not show any adjustment.

   Below is the screen you should see to enter and apply your voucher number:

   

4. Finally, click the “Next” button.

Part II: If you fail the exam that was scheduled with your unique voucher number, you may schedule a free retake by entering the promotion code: UPGRADE at the time of registration. Important: This discount will only be valid on retakes of exams that were initially scheduled using your unique voucher number.

Follow the steps below to enter your promotion code during the exam registration process:

1. Schedule an appointment for your VMware Certified Professional on vSphere™ 4 (VCP4) exam.
2. Once at the payment screen, scroll to the bottom of the page to access the “Promotion Code” field.
3. Enter the promotion code “Upgrade” and click “Apply Promo Code.”

   Below is the screen you should see to enter and apply the “Upgrade” promotion code:

   

4. Finally, click the “Next” button.

Both the full price and free “Upgrade” exams must be taken by January 31, 2010. Offer valid for the VMware Certified Professional on vSphere™ 4 (VCP4) exam only (exam code – VCP410). Only one (1) offer per person. Standard VMware retake policy rules apply.

Hey big datacenter, I think “booyah” is in order, with this almost stealth announcement of UIM for Ionix!  

Look at the big picture and see what this means for your datacenter!

So, out of box today UIM fully supports management of the whole Cisco Unified Computing System (UCS) stack, with evolution to support the rest of the Vblock infrastructure!   Which means taking your Pain of glass you have today and truly turning it into a comprehensive datacenter wide pane of glass for managing the entire stack from a single interface.

What this can mean is consolidated views of your entire Vblock infrastructure..

In the first release your datacenter will be cooking with Service Profile Catalogs enabling a “recipe” for building services and the basis for truly delivering infrastructure as a service.  Yea I know it sounds like lip service but when was the last time you truly had this level of ‘cookie cutter’ capability to deploy what you want, where you want it without having to reinvent the wheel every single time – Service Profile Catalogs will be the answer to let you take control of your datacenter again.

Though, if you feel that even creating recipes is a recipe for disaster – Policy-based management helps keep your environment honest to ensure configuration policies are set and enforced to ensure system-wide compliance to avoid configuration drift.   Oh, did I mention this functionality is also fully supported in this release of UIM with Cisco UCS Network infrastructure, such as Nexus and MDS? I say sweet! :)

What helps to complete this story is Unified Provisioning, configuration, change management – and a simplified integration.

What I’m particularly floored by is the deployment, bare metal provisioning which includes automated provisioning of the disaster recovery site! (Whoa, he did not just say Automated DR!)

The story around provisioning, configuration and change management will be the foundation of your success in the datacenter of the future.   Think about it! unlimited revision history, fine-grained tracking, traceability, and reproducibility! This isn’t the datacenter of 2010! This sounds more like the datacenter of 2100!     Out the gate this first release of UIM will focus on the unified provisioning, configuration and change control of Cisco UCS and the related network infrastructure.

You aren’t going to get away so easily though! I did say simplified integration and I mean it!   UIM Element management integrates with your existing enterprise management solutions on the floor today, providing change and compliance events to help track critical changes.   Furthermore, it leverages Cisco UCS manager APIs and EMC storage management systems allowing you to take advantage of existing instrumentation and component configuration.

So, putting all the marketing jibber jabber aside what does this mean for you, the datacenter owner?   This means that old fashioned model of “Is UCS ready? WTF is this VCE thing? Why do I even need a simplified datacenter operation? What do you mean Private Cloud, it’s sunny outside!”  It means welcome to the future of your datacenter.   The days of silo provisioning, configuration, management and troubleshooting are over!   You know that the top of mind conversation for the 2010 datacenter and on ever C-class’s lips will be  datacenter virtualization, reshaping the data center, and enhanced security – Take a look at that Gartner list and you tell me that VCE isn’t the answer to 5 or more of them ;)

So, the future is most definitely here (hey, 14 days ahead of schedule! How can you go wrong?!)  So there’s no better time than the present to educate yourself about this opportunity and what the rest of the future lay in store.  if you’re looking to discuss the future of your datacenter, let me know because your priorities are my priorities!

I’ve taken the liberty to consolidate all of the Ionix Unified Infrastructure Manager 1.0 documents here for your ease: (Powerlink credentials required)

? EMC Ionix Unified Infrastructure Manager Release Notes
? EMC Ionix Unified Infrastructure Manager Data Sheet
? EMC Ionix Unified Infrastructure Manager Installation Guide
? EMC Ionix Unified Infrastructure Manager Report Advisor User Guide
? EMC Ionix Unified Infrastructure Manager Backup and Recovery Guide
? EMC Ionix Unified Infrastructure Manager System Management Console Guide
? EMC Ionix Unified Infrastructure Manager Regular Expressions User Guide
? EMC Ionix Unified Infrastructure Manager Infrastructure Driver Release Version Support Matrix
? EMC Ionix Unified Infrastructure Manager Non-EMC Software Read Me
? EMC Ionix Device Services Engineering DASL Language Changes

I’d also like to thank Chad Sakac for this great YouTube Video and post More VCE Vblock Details including EMC Ionix Unified Infrastructure Manager and Storagezilla for their post Vblock and Ionix Unified Infrastructure Management

So for those of you who know me, you know I initially complained about a data reconstruction problem with my ix4-200d! I accidently pulled the power cable out (doh!) and then my system came up JUST fine, and said “Data reconstruction, 2%” Yea, it said that FOREVER – And it did nothing and got nowhere! Regardless of how many reboots I made! (Though my data access was fine!)

And even going to the “Update Device Software” tab, it always reported “The device software is up to date” Which I now know is a LIE! LIES I SAY! :)

I did a little searching and came across an updated firmware! (oh my!) however it didn’t say it’d do anything about data reconstruction problems! But hey, I always like to be running the latest/greatest, so I downloaded and installed the latest firmware! StorCenter ix4-200d Firmware Version 2.1.25.229: Read First (You’ll find this to be quick and painless!)

Well, some minutes passed and all of a sudden the system was all “DATA RECONSTRUCTION IS HAPPENING IN THE HIZZY!” Okay, not in those exact words.. but I don’t feel like pulling my power to try to reproduce the problem – needless to say, my data reconstruction resumed and finished in short order! Score one for the bucko! (dated reference much?!)

So I deep dove into the system to see what else had changed! (nothing consequential that I could find) but my journey to find a way to ssh this box had not ended! I was determined! I must.. I must.. I must increase my SSH ability! And while searching I came across not only this webpage SSH/Shell access to iomega StorCenter ix2 but that little gem of a webpage included this little link at the bottom! http://ip-of-nas/support.html – Which when you browse to it on your ix4, you end up seeing a page which looks like… this!

This has a few little gems, only two of which will I look at in any detail – Support Access and Recover Disks

Well, Support Access looks pretty damn straight forward! Check the box, reboot, and SSH will be enabled (permanently!)

The Storage Recovery Verification is a bit more interesting – my “guess” is that it allows you the ability to force the data reconstruction many of us complain of! Again, I have no intention of forcing the deal to try to see what happens if I fail my system – You simply let me know if this works for you – with data reconstruction woes :)

Sweet, eh! So, I feel comfortable sharing the process on how to do this.. because frankly, I had to find it from the outside looking in! So I definitely grant you good luck on solving your data reconstruction, firmware updating, and enabling SSH on your NAS!   Until I find an externally cited source though.. I cannot share with you my passwd I used to log in to my ix4 ;)

As promised!  Shell access to your ix2/ix4 exposed! “Get yer red hot ssh here!”

If you come across a site referencing it though, I’d be glad to add it to the mix!  Thanks for your patience.. and look forward to a future post around getting my ‘gigabit runs at 100mb’ problem :)

Welcome to Episode 2 in a series around information for you regarding EMC FAST! (Also known as Fully Automated Storage Tiering!)

You may recall from Episode 1 that I said this was something I am extremely excited about – and I thought I made that clear!  

To tell you the truth at first I was mainly excited about the V-MAX FAST, and didn’t even give much thought to the whole "Unified" Celerra FAST or  CLARiiON FAST

That was until I started to delve into the details, find, sort and collect the documents (which I unveil for you to find here!) and not to mention all of the other features above and beyond just FAST! That is what got me excited for FAST beyond the V-MAX!  So I hope this collection of documents gets you going in the right direction so you can become just as excited about FAST for the Celeriion just as I AM :)

I know a lot of you are looking for materials and information regarding FAST – There are numerous questions you have regarding this and since a lot of you are self-starters, I’m going to tell you what information I directly know about today, and where to get it!

Available today on PowerLink are the following documents around Celerra FAST and CLARiiON FAST in the areas of Introduction, Implementation and Solution

The documents below require credentials on EMC’s PowerLink – so please keep that in mind when it comes to accessing the links!

• Celerra
  • Automated Tiered Storage with EMC Celerra and Rainfinity File Management Appliance – Applied Best Practices
  • Celerra Fully Automated Storage Tiering (FAST) Demo Lab Guide
  • Reference Architecture: Automated Storage Tiering on EMC Celerra
  • Reference Architecture: EMC Celerra Fully Automated Storage Tiering
  • EMC Celerra Unified Storage
  • EMC Rainfinity File Management Appliance
  • Storage Tiering with EMC Celerra FAST
  • EMC Celerra NetWork Server – Release Notes
  • Video: Foster Pepper on Celerra FAST
    • Definitely check out the video! I thought about hacking together a display of the video on here, but since it’s not published via YouTube or other, and I didn’t want anyone to spank me for exporting the .flv video, and uploading it or displaying it through another site – I’ll just link you to it’s source :)
• CLARiiON
  • Data Sheet: EMC CLARiiON CX4 Series
• Other great resources!!!
  • Theory and Best Practices for FAST: Performance and Planning
  • Enterprise Flash Drives and Unified Storage – Technology Concepts and Business Considerations
  • Clipper Group: EMC Rolls Out Fully Automated Storage Tiering and Other Storage Enhancements
  • Building the Virtual Information Infrastructure – Technology Concepts and Business Considerations
  • EMC Ionix ControlCenter 6.1 Admin guide – includes steps around FAST
  • Handout: Simple, Powerful, Unified Storage from EMC
  • EMC FAST and Technology Direction

Being that I’ve consolidated Celerra and CLARiiON into a single post, you might be asking “Well, what value do I get from either or both of these?!” Here is a Features and Benefits list!

I know what you’re saying “Wow Christopher, you got those marketing terms down pat!” hee, but seriously, those are quoted verbatim from the links mentioned above.   However, one hard solid benefit of Celerra you need to make sure you’re always aware of is the fact that on its own, Celerra largely reduces your backup window.  Add FAST to Celerra and watch out!

So, I hope you get as much joy and excitement out of this new launch and technology which will revolutionize the way you not only do business but by the way you think about SLA’s and business problems in the future.   I’ll cover specific details of how this has solved real hard business problems for customers so you can enjoy those successes like I have!

I’ve provided these direct links using PowerLink and a Partner account (not employee)  – Please advise if for whatever reason you’re unable to find something and I’ll be sure to get that taken care of and the document in front of you!   Also, if you come across a document I missed and you think should be included, raise the roof and let me know and I’ll be sure to get it featured here! Not to mention if you find a particular document to be overly useful, feel free to comment on that fact, I’d love to know which would be a better doc to re-read or recc’ to others!

I’m really excited about this and your questions are what will make me and the whole community as a whole a lot more knowledgeable around this subject! So Keep em coming!

Be sure to check out my other posts about EMC FAST: One Stop Shop for Symmetrix V-Max Fully Automated Storage Tiering (FAST) docs! and FAST from EMC – Performance meet the quickening!